Case: ATM-1000L Slot Raise Boring Machine — Pangang
Hotline:
Project Case Study: ATM-1000L Slot Raise Boring Machine at Pangang
Project Location
Country: China
Project: Pangang Mining Project
Project Type: Vertical Slot Raise Construction for Deep-Hole Blasting
Equipment Model
ATM-1000L Slot Raise Boring Machine
Technical Parameters
Number of Raises Completed: 9
Total Drilling Length: Over 200 m
Drilling Depth: 23–25 m per raise
Inclination: 90° vertical
Reported Deviation Rate: 0.1%
Average Drilling Efficiency: 1–1.5h/m
Rock Conditions: Hard granite with interbedded layers, fault zones, and fractured formations
Minimum Spacing Between Adjacent Holes: 550 mm
Working Chamber Width: 4.2 m
Project Challenges
Restricted Underground Working Space
The working chamber was only 4.2 m wide, limiting equipment positioning, installation, and movement underground.
Hard Rock and Complex Geological Conditions
Hard granite, combined with interbedded layers, faults, and fractured zones, created challenges for rock breaking, drilling stability, and vertical alignment.
Precision Requirements and Closely Spaced Raises
All nine raises required a vertical design. With only 550 mm between adjacent holes, accurate positioning and deviation control were essential to reduce the risk of hole breakthrough and maintain borehole integrity.
Blasting Efficiency and Rework Control
Some areas experienced unsatisfactory blasting results, creating a need for supplementary drilling and increasing time and cost pressures.
Solutions and Results
Customized Site Preparation and On-Site Technical Support
Before equipment delivery, Yier Technology's service team provided guidance on working chamber and foundation layout to optimize the limited operating space.
Service engineer Guo Yi supported equipment transport underground, installation, commissioning, trial operation, and maintenance training. Over the course of more than 200 m of drilling, the team also trained two operators to independently operate, maintain, and service the equipment.
Precision Drilling in Hard Granite
The project team worked with mine personnel to repeatedly check drilling alignment and adjust operating procedures and feed speed according to site conditions. The ATM-1000L's fine positioning adjustment system and multi-angle positioning capabilities helped the team correct drilling deviations and maintain alignment.
The reported overall deviation rate was controlled to 0.1%, supporting the precision requirements of vertical raise construction.
Optimized Positioning for Closely Spaced Holes
With adjacent holes spaced just 550 mm apart, the team carefully planned equipment positioning and assessed hole spacing and potential deviation risks. Drilling parameters and borehole layout were adjusted to help protect borehole integrity and reduce the risk of adjacent-hole breakthrough.
The team also optimized blasting parameters and drilling layouts to address areas requiring supplementary drilling, aiming to reduce rework and improve overall construction efficiency.
Verified Project Results
Since commissioning on May 26, 2025, the ATM-1000L has completed nine vertical raises totaling over 200 m, with individual raise depths of 23–25 m. Average drilling efficiency was reported at 1–1.5 hours per meter, and the overall deviation rate was reported at 0.1%.
The project demonstrates the ATM-1000L's capabilities in hard-rock drilling, precision alignment, and confined underground working environments, supported by on-site engineering services and operator training.
Related Products